SeaLine® Fiber optic cables

FiberConnect Heavy Trunk

Divider for multi-fiber loose tube cables

Applications

Indoor cabling, outdoor cabling

Properties

  • Multi-fiber loose tube cable with factory-assembled connectors
  • Extremely robust divider heads
  • Graduated whip lengths to save space
  • Whips dyed in the same colour as the fibers
  • Bundle marking close to the divider head
  • Water- and dust-tight according to IP67
  • Tensile strength of the pulling tool = 1000 N
  • Tensile strength of the divider head > 4000 N
  • Crush resistance of the pulling tool = 20 kg/cm2
  • Crush resistance of the dvider head ≥ 200 kg/cm2
  • The thermal resistance is at least equal to that of the assembled cable
  • Divider head with square countersinking for quick and tool-free installation in 19" racks

Easy Pull E1

The installation system can be used for assemblies with up to four single fibers. The connectors are optimally protected against damage during installation (in accordance with protection class IP20) and pulling in the cables is made much easier. Once the cables have been pulled in, the installation protection can be easily removed and the connectors can be joined to the adapters or transceivers as usual. Gauging the assembly in the plant is an integral part of the delivery package.

Easy Pull B1

The new Easy Pull B1 is compared to Easy Pull E1, thinner and more compact for assemblies with only one plug. With flexible eyelet for easier installation in narrower ducts. Can be used if remain on the cable for further use after it has been pulled in.

Number of fibers n 1 2 3
Min. bending radius of cable as per cable datasheet
Min. bending radius buffered fiber/whip 30 mm 30 mm
Min. hole Ø for through-feeds with cabinets and walls * 30 mm 30 mm
Max. pull force on tool 200 N 500 N 600 N

*depending on connector type


Easy Pull E2

This installation system can be used to protect assemblies with up to 32 single fibers (with IP54 protection). The protective conduit can be easily unlatched and removed after pulling in. The connectors can be joined to adapters or transceivers as normal. Gauging the assembly in the plant is an integral part of the delivery package.

Number of fibers n

2

4

5 to 12

13 to 32

Min. bending radius of cable acc. to cable datasheet
Min. bending radius buffered fiber/whip 30 mm 30 mm 30 mm 30 mm
Outer Ø fanout element 14 mm 14 mm 21 mm 30 mm
Resistance to apex pressure (protective conduit) 350 N 350 N 350 N 350 N
Max. pull force on tool 500 N 500 N 600 N 600 N
PG gland M20 (PG13.5) M25 (PG21) M25 (PG21) M50 (PG36)
Outer Ø of protective conduit 20 mm 30 mm 30 mm 55 mm
Min. hole Ø for throughfeeds with cabinets and walls 35 mm 40 mm 45 mm 60 mm
Material (protective conduit) PA 6 (flame-retardant / halogen-free / UV-stable)

Contact

For further information please contact us

Contact form

Download

Fiber Optics

Fiber Optics

Light switching · Light transportation· Light distribution

PDF

Languages
Contact